No reviews found
Brand
Nikomax
Model no.
NMC-RP24SE2-1U-MT
| Characteristics | |
| Category | 6 |
| Bandwidth, MHz | 250 |
| Diameter of conductors, AWG | ~24-22 AWG (0.50-0.65 mm) |
| Connection style | Fully shielded |
| Compliance | Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA -568-C.2 |
| Supported applications | 10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6), ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive |
| Temperature ranges | Storage -40 to +70 ° C. Installation 0 to +50 ° C. Operating -10 to +60 ° C |
| Individual packing | Cardboard box |
| Warranty | 5 years - extended; 25 years - as part of the NIKOMAX SCS certified |
| Number of ports | 24 |
| Height, U | 1 |
| Connector type | RJ45/8P8C |
| Connector material in connector | Phosphor bronze |
| Contact coating material | Gold (50 micro-inches) over nickel (100 micro-inches) |
| Number of cable connections | Not less than 750 |
| Type of IDC contacts (seal) | 110/KRONE |
| Layout diagram | T568A/B |
| IDC Contact material | Phosphor bronze |
| IDC coating material | Tin (100 micro-inches) |
| Plastic material | High-strength, non- flammable, meets UL94V-0 |
| Marking | All ports are numbered, there are additional labeling area |
| Installation | 19" Cabinet or rack |
| Depth in rack, mm | 100 |
| Material of the supporting structure | Galvanized steel: body - 1.5mm; cover - 1 mm. |
| Protection level | Metallic (Nickel) |
| Insulation resistance | Not less than 500 M ohms (at constant voltage of 100 V) |
| Maximum load-bearing capacity | Up to 1000 V, 60 Hz for 1 minute |
| Contact resistance, µO | Not more than 20 |
| IDC Contact resistance, µO | Not more than 2.5 |
| Equipment | |
| Patch panel | 1 |
| Cable tie | 24 |
| Grounding wire | 1 |
| Screw-washer-nut | 4 |
| Installation Instructions | 1 |
Please sign in so that we can notify you about a reply
