No reviews found
Brand
Ubiquiti
Model no.
EP-R8
| Mechanical | |
| Dimensions | Without wall-mount: 326.6 x 382.7 x 88.8 mm (12.9 x 15.1 x 3.5") With wall-mount: 326.6 x 382.7 x 105.5 mm (12.9 x 15.1 x 4.2") |
| Weight | Without wall-mount: 3.4 kg (7.5 lb) With wall-mount: 3.8 kg (8.4 lb) |
| Enclosure material | Diecast aluminum alloy, UV-resistant polycarbonate |
| Mount | Pole/wall mount |
| Wind loading | 153 N at 200 km/h (34 lbf at 125 mph) |
| Wind survivability | 200 km/h (125 mph) |
| Hardware | |
| Processor | Dual-core 600 MHz, MIPS64 with hardware acceleration for packet processing |
| System memory | 2 GB DDR3-1600 RAM |
| Code storage | 4 GB |
| Networking interface | (1) RJ45 serial port (1) RJ45 PoE In port (6) 10/100/1000 RJ45 ports (2) 10/100/1000 RJ45/SFP combination ports |
| Power method* | (1) DC terminal block (2) RJ45 (PoE In and eth0) 54V DC, 6A input *Self-correcting polarity protection on DC terminal block only, diode red Protection on all power inputs. |
| Power supply | Min. 54V / 0.8A (Excludes PoE output) |
| Passive PoE input* | (2) 54V / 1.5A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) passive PoE, eth0 and PoE In *PoE In is DC only, no data. |
| Passive PoE output | (2) 54V or 24V / 1.4A, 4-pair (+1, 2, 4, 5; -3, 6, 7, 8) passive PoE, eth1 to eth2 (5) 24V / 0.7A, 2-pair (+4, 5; -7, 8) passive PoE, eth3 to eth7 |
| Power monitoring | (1) DC terminal block, input power (2) RJ45, PoE In and eth0, input power |
| Supported voltage range | 5642V DC |
| Max. power consumption | 40W (Excludes PoE output) |
| Button | Factory reset |
| LEDs | System: Power Data ports: speed/link/activity, PoE SFP ports: speed/link/activity |
| Ambient operating temperature | -40 to 65° C (-40 to 149° F) |
| Ambient operating humidity | 10 to 90% noncondensing |
| Certifications | CE, FCC, IC |
| NDAA Compliant | Yes |
Please sign in so that we can notify you about a reply
